• Home
  • About Us
  • Gallery
  • Products & Services
    • Digital Services
    • Initial Lisi Press
    • IPS e.max®
    • Dental Direkt CubeX²
    • BruxZir® Solid Zirconia
    • Lava™ Zirconia
    • PFM: Porcelain Over Metal
    • FCC: Full Cast Crowns
    • Implants
    • Miscellaneous
  • Contact

BruxZir solid zirconia 
SOLID ZIRCONIA IS MORE BRAWN THAN BEAUTY


SCIENTIFIC VALIDATION
BruxZir Solid Zirconia crowns & bridges are made of the highest quality zirconia powder from Japan. We chemically and physically reprocess the powder to further reduce the zirconia particle size. BruxZir milling blanks are then created through a unique patented process. Unlike conventional high-pressure milling blank manufacture, our process gives BruxZir zirconia improved light transmission, which provides a lower, more natural shade value.    
Picture
BruxZir zirconia exhibits higher translucency in the warm color spectral wavelength (> 550 nanometers), allowing for more natural-looking restorations.

Picture
In a recent study to measure the volumetric loss of enamel, glazed BruxZir zirconia was found to wear similarly to enamel and virtually identical to glazed IPS e.max.         

1. Wear of Enamel on Polished and Glazed Zirconia: Shah S, Michelson C, Beck P, et al. 2010; Washington DC: AADR. Abstract # 129615.    
The antagonistic (Steatite balls) wear shows BruxZir zirconia only with 72+-21 microns, which is significantly lower than Ceramco 3 (110+- 48 microns).

The University of Tubingen study was run using an eight chamber Willytec Chewing Simulator at 1.2 million cycles. 
Picture

The 50 % smaller average grain size of RruxZir zirconia improves its physical properties.
Picture
Picture

BruxZir Solid
Zirconia Crown



Picture
Picture
Gold Crown
Picture
Picture
Porcelain and
Metal Crown


Picture
Picture

bruxzir solid zirconia

Prescribe BruxZir Solid Zirconia restorations instead of metal occlusals and cast gold
Picture
Picture
  • Ideal for bruxers who have destroyed natural teeth or previous dental restorations
  • An aesthetically pleasing alternative to metal occlusal PFMs and cast gold crowns and bridges
  • Prepare the material conservatively, as thin as 0.5 mm with feather edge margins, much like you would cast gold

For more information, visit www.bruxzir.com

BruxZir is a registered trademark of Glidewell Laboratories. Ceramco is a registered trademark of DENTSPLY 
Ceramco. IPS e.max is a registered trademark of Ivoclar Vivadent.
S&E Dental Studio Inc.    |     Algonquin, IL 60102     |     Phone:(847) 458 - 8282     |      Email:[email protected]     |      © 2017 By S&E Dental Inc.